Start My Skills Review
Accepting applications

Advanced Diploma of Work Health and Safety

This qualification reflects the role of individuals who apply advanced practical knowledge and skills to coordinate, facilitate and maintain a work health and safety (WHS) program.

Qualification overview
BSB60619
LevelAQF 6Advanced Diploma
Units115 core, 6 elective
PackageBSBBusiness Services Training Package
Timeframe
Typically 4 to 6 weeksAfter evidence is submitted to the RTO. Individual timelines vary.
Fees
Personalised quote before you commitRefund and withdrawal policy
A carpenter marking timber framing on a building site, a chef plating a dish in a commercial kitchen, and an aged care worker helping a resident with her walking frame
Recognition of Prior Learning

What is an RPL qualification?

Recognition of Prior Learning assesses skills you already have against a nationally recognised qualification. Demonstrate competency, and you receive the same nationally recognised qualification, issued by a registered training organisation (RTO), as someone who completed the full course.

Who is eligible for RPL?

  • You have years of experience in your field
  • You learned the work on the job, through mentoring or on your own
  • You need the qualification for licensing, promotion or migration
  • You hold overseas qualifications you want recognised in Australia

About this qualification

Advanced Diploma of Work Health and Safety (BSB60619) through RPL

What the qualification covers

This qualification reflects the role of individuals who apply advanced practical knowledge and skills to coordinate, facilitate and maintain a work health and safety (WHS) program. It is suited to those who possess significant work health and safety skills and knowledge; and wish to consolidate and build pathways to further educational and/or employment opportunities. Licensing/Regulatory Information No licensing, legislative or certification requirements apply to this qualification at the time of publication.

Entry requirements

All BSB51319 Diploma of Work Health and Safety core units or equivalent competencies. Equivalent competencies are predecessors to four of the following units, which have been mapped as equivalent. Note: BSBWHS519 is new to the core of the Diploma, equivalent to its previous version, and a requirement for entry into the Advanced Diploma. BSBWHS513 Lead WHS risk managementBSBWHS515 Lead initial response to and investigate WHS incidentsBSBWHS516 Contribute to developing, implementing and maintaining an organisation’s WHS management systemBSBWHS519 Lead the development and use of WHS risk management toolsBSBWHS522 Manage WHS consultation and participation processes.

Units of competency (17)

Core units

  • BSBWHS612 Develop and implement a strategy to support a positive WHS culture
  • BSBWHS613 Evaluate the WHS performance of an organisation
  • BSBWHS614 Conduct a WHS audit under the guidance of a lead auditor
  • BSBWHS616 Apply safe design principles to control WHS risks
  • BSBWHS617 Apply ergonomics to manage WHS risks

Elective units

  • BSBAUD601 Establish and manage compliance management systems
  • BSBINS601 Manage knowledge and information
  • BSBLDR601 Lead and manage organisational change
  • BSBLDR602 Provide leadership across the organisation
  • BSBPEF502 Develop and use emotional intelligence
  • BSBPMG530 Manage project scope
  • BSBPMG634 Facilitate stakeholder engagement
  • BSBSTR601 Manage innovation and continuous improvement
  • BSBSTR602 Develop organisational strategies
  • BSBWHS611 Develop and implement strategies that support work-related psychological health and safety
  • BSBWHS631 Apply occupational hygiene principles to manage WHS risks
  • TAEDES501 Design and develop learning strategies
An RPL it team member sorting an electrician's job photos and reference letter into his evidence folder at a ute tailgate on a building site

How RPL works in four steps

  1. Free Skills Review

    Tell us about your work experience. We’ll match it to valid qualifications.

  2. Build your evidence

    Your account manager helps you gather your required evidence for your RTO.

  3. RTO assessment

    Your evidence portfolio is submitted to our partner RTO. A qualified assessor evaluates your competency.

  4. Get your qualification

    Once assessed as competent, the RTO issues your nationally recognised qualification.

Career Outcomes

Explore Roles Associated with this Qualification

If your current or past work looks like one of these roles, this qualification may suit you.

  • 01

    Occupational Health and Safety Practitioner

    Coordinating and maintaining comprehensive WHS programs across diverse organisational contexts.

  • 02

    WHS Manager

    Leading the strategic direction of safety systems and fostering a proactive safety culture within large teams.

  • 03

    Safety Auditor

    Evaluating organisational safety performance and conducting systematic audits against national standards.

Evidence Checklist

What Suitable Evidence Can Support Your Evidence Portfolio?

Your consultant can help you identify relevant workplace records. The delivering RTO decides whether the evidence is sufficient and current.

Work History & Roles
  • Comprehensive CV detailing WHS leadership
  • Official position descriptions
  • Organisational charts showing reporting lines

Strategic WHS Planning
  • WHS culture improvement strategies
  • Safety performance evaluation reports
  • WHS management system implementation plans

Auditing & Compliance
  • Internal WHS audit reports
  • Gap analysis documentation
  • Compliance registers and legislative reviews

Technical Risk Control
  • Safe design review records
  • Ergonomic assessment reports
  • Risk management frameworks and tools

Leadership & Consultation
  • Board reports on safety performance
  • WHS committee meeting minutes
  • Stakeholder consultation logs

Qualification comparison

RPL and Traditional Study

Two routes to the same qualification, assessed against the same RTO competency standards.

RPL PathwaySupported by RPL it, assessed by the RTO
Traditional StudyDelivered and assessed by the RTO
Starting point
Your existing, current workplace skills and evidence
A planned course of learning and assessment
How competency is shown
Workplace evidence mapped to the qualification requirements
Learning activities, assignments, practical work, and assessment
Assessment decision
Made by a qualified assessor from the delivering RTO
Made by a qualified assessor from the delivering RTO
If gaps are identified
Additional evidence or targeted gap training may be required
Learning and assessment continue through the course structure
Qualification outcome
Issued only when the RTO determines all requirements are met
Issued only when the RTO determines all requirements are met

RPL it Australia reviews

What our clients say

Selected Google reviews. Individual experiences vary. Every applicant is assessed against the same requirements, and some require gap training or additional evidence.

Frequently asked questions

Recognition of Prior Learning, your experience, and your next step.

Got more questions?
How do I get started with RPL for this qualification?

The process begins with a free skills review where we assess your experience against the Advanced Diploma requirements. Once a gap analysis is complete, you will compile a portfolio of evidence for RTO assessment, which can lead to your nationally recognised qualification.

Is an RPL qualification the same as one from full-time study?

Yes, a qualification obtained through Recognition of Prior Learning (RPL) is identical to one earned through traditional classroom study. It is nationally recognised under the Australian Qualifications Framework (AQF) and held in the same regard by employers and regulatory bodies.

How long does the process typically take?

Once your full portfolio of evidence is submitted to our partner RTO, the assessment and certification process typically takes between 4 to 6 weeks.

What are the entry requirements for this Advanced Diploma?

To qualify for RPL for the BSB60619, you must have completed all core units from the BSB51319 Diploma of Work Health and Safety or their equivalent. This ensures you have the foundational technical knowledge required for advanced safety management.

What kind of evidence do I need to provide for WHS management?

Evidence often includes WHS management system documentation, risk assessment reports, safety audit results, incident investigation records, and proof of your role in facilitating WHS consultation within an organisation.

Can I use this qualification for OHS Practitioner roles?

Absolutely. This qualification is specifically designed for individuals who coordinate and maintain WHS programs. It formally validates your ability to apply a substantial knowledge base to high-level safety leadership and practitioner roles.

How long does the RPL process take?

Most candidates who submit a complete evidence portfolio receive their qualification within 4 to 6 weeks from RTO assessment. The total timeline depends on evidence readiness. Strong documentation can help the process move quickly, while evidence gaps or gap training may take longer.

Is an RPL qualification the same as one from TAFE?

Yes. An RPL qualification is issued under the Australian Qualifications Framework, the same framework that governs qualifications from TAFE colleges and all other Registered Training Organisations. It carries the same national recognition. Licensing requirements vary, so check with the relevant authority.

How much does RPL cost?

RPL costs vary by qualification level, complexity, and number of units. Because RPL assesses what you already know rather than teaching new content, it is typically less expensive than full enrolment. Contact our team for a tailored quote. Payment plans are interest-free with no establishment fee, and the instalment schedule and any extension fee that could apply are set out in your quote.

What evidence do I need for RPL?

Evidence can include your resume, reference letters from employers, photos or videos of your work, previous qualifications and certificates, job descriptions, and any other documentation that demonstrates your skills and knowledge. The RTO tells you exactly what evidence it needs for your specific qualification, and your RPL it consultant helps you put it together.

Can I get credit for units I have already completed?

Yes, if you hold a qualification or Statement of Attainment that includes units equivalent to units in this qualification. This is called credit transfer. The delivering RTO checks your AQF certification documents or authenticated VET transcript. Where a unit is equivalent and your certification is authenticated, the RTO must grant credit for it. It can refuse only on limited grounds, for example where a licensing or regulatory requirement calls for reassessment.

Delivering RTO · 1 partner RTOs

Assessed and issued by a partner RTO

Your delivering RTO is confirmed before enrolment. Check any RTO’s registration on training.gov.au.